开鑫磁力

开鑫磁力

Previous
Next

ABOUT US

Zhejiang three-gold Magnetic Machine Co., Ltd 

Zhejiang three-gold Magnetic Machine Co., Ltd (formerly Jinyun Kaixin Permanent Magnetic Sucker Factory)is founded in 2000. It is one of the biggest manufacturers which specialized in permanent magnetic lifters and vacuum lifting suckers.The main products are permanent magnetic lifter, magnetic sucker, electric control magnetic lifter and sucker,iron separators, vacuum lifting sucker and other magnetic tools. 

  • 2000

    /year

    Time of incorporation

  • 35000

    +㎡

    Area covered

  • 150

    /people

    Number of employees

 开鑫磁力机械有限公司

NEWS CENTER

2021

05 -19

Permanent magnet crane, also known as electromagnetic crane and automatic suction cup, is mainly used in shipyards, structural parts factories, warehouses, workshops, freight yards and other lifting equipment to absorb ferromagnetic materials or workpieces. It is suitable for absorbing and transporting steel plates, ingots and sections. It can also be used to absorb and transport scrap and broken iron. It has the characteristics of light structure, convenient operation, strong clamping force, safety and reliability, which is conducive to improving the working conditions of loading and unloading operation and improving labor productivity. Therefore, it has been widely used in factories, docks, warehouses and transportation industries. For lifting tools. The magnetization and demagnetization methods of permanent magnet lifting device are as follows: Many rules should be considered when using permanent magnet hoists. The permanent magnet lifting suction cup shall be located in the center of the non-metallic circle during lifting. There is no wood chips, stones, etc. between the permanent magnet lifting suction cup and non-metal. Reaction. The permanent magnet crane can be raised by reversing correctly and the return DC current reaches the working value added. Take the lead to turn on the power supply and check whether the path of the magnetization demagnetization control panel of permanent magnet socket is deformed. It can be seen that the indicator lights on the control panel flash red and green repeatedly, and there is no white broken line at first to indicate deformation. Secondly, when the weak magnetization stops, press the green knob and yellow knob on the controller panel of the electromagnetic crane. When the yellow light is on, it can be held tightly to magnetize. When the green light goes out, the permanent magnet socket is magnetized and weakly magnetized. The operation is the same, but the green light will be on after magnetization is achieved. After demagnetization stops, press the red and yellow knobs on the permanent magnet Jack controller panel. When the yellow light is on, please master the demagnetization function, and the indicator will change from green to white after realization. Zhejiang Kaixin Magnetic Machinery Co., Ltd. was founded in 2000. It is one of the manufacturers of permanent magnet spreader and vacuum spreader. Specializing in R & D, production and sales of rare earth strong magnetic equipment and vacuum spreaders. The main products are permanent magnet hoist, permanent magnet lifting device, electric control lifting permanent magnet suction disk, electric control permanent magnet suction disk, iron remover, lifting vacuum suction disc, etc. The products are widely used in the fields of mechanical processing, mold manufacturing, engineering machinery, ship manufacturing, etc. it is widely used in all over the country, and there are a considerable number of countries at home and abroad. The company is in line with the business tenet of "quality first and credit first", and is favored by many customers.

2020

12 -02

 The block is a very important accessory for lifting equipment. The pulley block consists of a fixed pulley and a movable pulley with a rope. The rope passes in series between the pulleys. The manufacturer of the permanent magnet hoisting device tells you that the fixed block does not move, only the pulley rotates, and the moving block moves synchronously with the heavy object, saving effort. Moreover, the more pulleys in the block, the greater the effort, but the moving speed at noon is correspondingly slower.     The manufacturer of permanent magnet hoisting device tells you that threading and winding of steel wire rope is an important and complicated task. The winding and winding quality of the wire rope directly affects the smooth progress of the lifting operation. If the windings are improperly wound, the resistance of the steel wire ropes in the group will change greatly during the movement, which will cause the upper and lower carriages to tilt. In severe cases, the heavy objects will lock themselves during the descending process.   The manufacturer of the permanent magnet hoisting device tells you that sometimes due to the poor transmission of the wire rope, the wire rope part of the block is loose, which will cause sudden vibration when lifting heavy objects. When the impact load is large, the wire rope will break and cause an accident.     The manufacturer of the permanent magnet hoist tells you that the threading and winding of the wire rope in the block should be carried out according to the specific conditions of the lifting operation, and appropriate threading and winding methods should be adopted. When buying a pulley block, first pay attention to whether the product design is reasonable and whether the quality meets the requirements for use. At the same time, pay more attention during use and check regularly as required. This is the correct way to use it.   Zhejiang Kaixin Magnetic Machinery Co., Ltd. is one of the manufacturers of permanent magnet spreaders and vacuum spreaders. The main products are permanent magnet jacks, permanent magnet hoisting devices, electronically controlled permanent magnet chucks, etc. The products are distributed all over the country, and are widely used in machining, mold manufacturing, engineering machinery, shipbuilding and other industries. There are a considerable number of countries at home and abroad, and the company is favored by many customers.     

2020

12 -10

 The manufacturer of the permanent magnet lifter tells you that if you want to use the lifting belt for a longer time, you must first choose a regular manufacturer. In the basic principles and methods of lifting operations, you should first consider choosing a suitable spreader. In recent years, the spreader industry in my country has developed rapidly, but the technical standards are not perfect and there is a lack of mandatory standards. Some domestic enterprises produce arbitrarily, even lower the safety factor, some cases of contract processing and non-standard production. The actual quality of the sling is uneven, and there are certain safety risks. Therefore, it is necessary to choose a formal manufacturer and establish a corresponding management system.     Before moving before factory inspection, the purchased sling must be produced and inspected by a professional manufacturer, and has a certificate and maintenance manual. The rated lifting weight, production number, production date and manufacturer of the product must be in obvious places that are not easy to wear. Name and other signs. The permanent magnet jack manufacturer tells you that if conditions permit, you can go to the supplier’s production plant for quality supervision.   Add a load-bearing test. For bulk purchases, you can extract them for professional measurement to effectively check whether the rated load meets the requirements. The permanent magnet jack manufacturer tells you that if necessary, you can cut the sheath to check whether the number of core joints exceeds the standard and whether the material is qualified.     Add a load-bearing test. For bulk purchases, you can extract them for professional measurement to effectively check whether the rated load meets the requirements. The permanent magnet jack manufacturer tells you that if necessary, you can cut the sheath to check whether the number of core joints exceeds the standard and whether the material is qualified.   Strict inspection before use. In the daily inspection of certain units, it is not enough to damage the outer sheath and inner core of the lifting belt. Many units neglect the elasticity check of the flexible sling. The manufacturer of the permanent magnet jack tells you that the circumference should be re-measured according to the standard and compared with the standard circumference. Employees should be informed of the standard length of each sling and how much it cannot be stretched to determine whether it meets the flexibility requirements.   

2020

11 -25

     The lifting pulley is a simple lifting machine that vertically lifts the weight through a sprocket or reel. It is light, compact, easy to use, suitable for simple lifting work in construction. Depending on the number of wheels, the lifting and original supports can be divided into single-door slides, double-door pulleys and multi-door pulleys. There are four types of high-hook impactors, sprocket cyclists, suspension ring skateboards and sling pulleys are divided into hooks, sprocket cyclists, suspension ring sliding and sling pulleys. Efficient use of labor-saving vehicles can achieve half the effort. The following permanent magnet hoist manufacturers will take you to understand.       The manufacturer of the permanent magnet hoisting device tells you that when the direction of the lifting pulley changes, or when the hook pulley is not used in high altitude operations, it is not recommended to use the hook pulley to prevent the hook from being removed. If hanging pulleys are used, protective measures should be taken. If after the hook, the hook is sealed with a thin wire so that the hook cannot be taken out; or use a hook with a tube, when the hook is hung, the hook is more convenient. Under the action of the spring, the Caucasian is bounced up and seals the hook.   The manufacturer of the permanent magnet hoist tells you that the pulley cannot be overloaded. When there are cracks or defects, the pulley will not be put into use. Other parts, such as hooks, shafts, pull plates, etc., are not allowed to be used when required. When walling, you should pay attention to the angle of the wire rope in the pulley box. In any case, the deviation of the pulley shall not exceed 4°~6°. Because when the polarity of the wire rope is too large in the pulley box, the abrasion of the wire rope and the side of the pulley are intensified. On the other hand, the wire rope can easily slip out of the rope groove, so even if it is an accident, the lifting operation cannot be performed normally. If only one of these bags is used, the weight should be reduced accordingly, and the original weight cannot be used.       The manufacturer of the permanent magnet hoist tells you that when the pulley block is worn out, you should try it first, check the part, there is no casing, friction or wire rope. If there is anything, it should be officially adjusted to formal. The rope that wears the sling or pulley block must meet the requirements of the pulley. When the diameter of the wire rope used exceeds the requirement of the pulley, we will increase the wear of the pulley, and the wear of the wire rope will also increase. The weight of the pulley must be equipped with corresponding thick steel wire.     

2020

11 -16

In the processing field, the electronically controlled permanent magnet chuck can be used as a machining center fixing device to install, position and fix the workpiece. Although many advantages of electronically controlled permanent magnet chuck fixtures cannot be replaced by traditional tooling fixtures, no tool can guarantee perfection. There are still some problems in the process from selection to use of the electronically controlled permanent magnet chuck.     In order to make your electronically controlled permanent magnet chuck fixture use more smoothly, we have listed four problems and proposed countermeasures, hoping to help people who use electronically controlled permanent magnet chuck fixtures.   Question 1: How to determine the appropriate electronically controlled permanent magnet chuck fixture? The choice of electronically controlled permanent magnet chuck fixture mainly depends on the user's purpose. There are different suction cups for different purposes. Common categories include suction cups for milling machines, suction cups for lathes, suction cups for grinders, suction cups for switch rails, and suction cups for high temperature quenching.   Question 2: Will the processed workpiece material affect the adsorption effect? Generally speaking, as long as it is a magnetically conductive workpiece, there is no problem. If it is stainless steel or a material with high carbon content, you cannot use an electrically controlled permanent magnet chuck clamp.   Question 3: What is the reason why the workpiece cannot be magnetized? First judge the material properties of the workpiece, and then check whether the workpiece is too small. Too small workpieces need to be fixed with clamps or guide blocks to increase resistance. If there is no problem, please check the rectifier to see if the fuse is blown and the power input and output are normal.     Question 4: What is the reason why the new electronically controlled permanent magnet chuck fixing device cannot attract magnetism? First check whether the AC input power is connected and the voltage is correct. Then check whether the suction cup power cord is disconnected or disconnected, and then check whether the rectifier switch and display settings are correct and whether the fuse is burned. It is emphasized here that the use of the electronically controlled permanent magnet chuck should strictly follow the instructions.   Zhejiang Kaixin Magnetic Machinery Co., Ltd. is one of the manufacturers of permanent magnet spreaders and vacuum spreaders. Specializing in the research and development, production and sales of rare earth strong magnetic equipment and vacuum spreaders. The main products are permanent magnet hoist, permanent magnet hoist, electric control permanent magnet chuck, iron remover, electric control lifting permanent magnet chuck, lifting vacuum chuck, etc. Products are widely used in machining, mold manufacturing, engineering machinery, shipbuilding and other industries, and are favored by many customers.  

Hotline

0578-3156218

FAX:

0086-578-3158718
Address:

No. 3 Zuoku Industrial Zone, Huzhen Town, Jinyun County, Zhejiang Province

  Zhejiang three-gold Magnetic Machine Co., Ltd

Mobile version

2021 Zhejiang three-gold Magnetic Machine Co., Ltd       浙ICP备14008984号-2      Powered by www.300.cn

Zhejiang three-gold Magnetic Machine Co., Ltd